Clutch Plate Set Compatible with Honda

Clutch Plate Set Compatible with Honda

A set of clutch plates compatible with Honda kart engines. Worn plates cause the clutch to slip, so replace them as a set when acceleration feels weak or the clutch overheats.

Clutch

The centrifugal clutch engages the drive as the engine revs rise and disengages at idle, so the kart can stand still with the engine running. Worn shoes or plates cause slipping, overheating and loss of acceleration. Check the clutch regularly, keep it clean and lubricated as specified by the manufacturer, and replace worn parts as a set.

Parts for four-stroke kart engines

Many rental and leisure karts use single-cylinder four-stroke engines such as the Honda GX160, GX200, GX270 and GX390, or compatible engines based on the same design. Many parts are interchangeable with these compatible engines, but always check the engine model and capacity before ordering. Original and OEM-quality parts keep the engine reliable, and a fleet that uses the same engines can keep a small stock of the most common parts.

Engine maintenance

Regular maintenance keeps a rental engine reliable for many hours. Change the oil according to the hours of use, clean or replace the air filter often, especially on dusty tracks, and check the spark plug, the carburettor settings and the clutch. Gaskets and seals should be replaced whenever the engine is opened. Keeping a maintenance log for every kart helps you plan parts and spot problems early.

Chain, sprocket and gearing

The chain and sprockets transfer the power of the engine to the rear axle. The pitch must match: 219 chains are used on most racing karts and 428 chains on many rental karts with four-stroke engines. The number of teeth on the sprockets defines the gear ratio: more teeth on the rear sprocket give stronger acceleration, fewer give higher top speed. Replace chain and sprockets together when they are worn, since a new chain on a worn sprocket wears out quickly.

Inspection and maintenance

Rental karts take impacts from barriers, kerbs and other karts every day. A regular inspection routine catches problems before they become dangerous: look for bent components, cracks around welds, worn bushes and loose fasteners. Replace damaged parts rather than straightening them, because bent steel loses strength. After any repair, check the alignment and make sure all fasteners are tightened to the correct torque and secured with lock nuts or thread locker where required.

Correct installation

Install chassis parts with the correct tools and tighten bolts gradually and evenly. Use new self-locking nuts where the originals were self-locking, since the nylon insert loses its grip after repeated use. Check that moving parts such as steering components and axles turn freely without play after installation. Keep a stock of the most common wear parts so that a kart can return to the track quickly after a minor incident.

Frequently asked questions

Will this part fit a compatible (non-Honda) engine?

Many parts are interchangeable between Honda engines and compatible engines of the same capacity, but dimensions can differ. Send us the engine model and a photo if you are unsure.

Do you supply original Honda parts?

Where the title says original or OEM, the part is an original Honda part; otherwise it is a compatible replacement of good quality.

How quickly will I receive my order?

We ship throughout Greece, with free shipping on orders over 150€. For availability and delivery time of a specific part, call +30 2310 467466 or email info@gokart.gr.

Ordering from Go Kart Center

Since 2010 in Thessaloniki, we recommend parts and equipment based on real use on our own track. We ship throughout Greece, free for orders over 150€, and answer every question about sizes and compatibility at +30 2310 467466 or info@gokart.gr.